News

Home / News

Insect killer lamp troubleshooting considerations
21-06-2019
1. The UV fluorescent lamp does not light up. Analysis and maintenance: UV fluorescent lamps are not bright for a number of reasons. Firstly, the power line and switch S are normal. Generally, the lamp is aging, air leak...
Mosquito lamp repair experience sharing
15-06-2019
First, the structure of electronic mosquito killer The Aikebo brand electronic mosquito killer lamp is a hanging and standing dual-purpose lamp. The outline structure is shown in Figure 1. It is mainly composed of UV flu...
Common fault repair techniques for mosquito killers
10-06-2019
UV fluorescent tubes often flicker (flash jump) This kind of fault is usually caused by the low voltage of the mains, and some is caused by the aging of the lamp. If the measured mains voltage is normal, the lamp can be ...
Mosquito lamp disassembly and assembly essentials
31-05-2019
1. Before disassembling the mosquito killer, the power plug must be unplugged and should not be energized. Then, use a screwdriver to reach the fence and touch the adjacent two electrodes of the power grid for discharge ...
Mosquito lamp common fault repair tips
25-05-2019
(1) UV fluorescent tube is not bright There are usually two cases in which the UV fluorescent tube is not bright: First, the 220V mains does not enter the mosquito lamp circuit, and there is no voltage on the high voltag...
What is the principle of electronic mosquito killer?
17-05-2019
The electronic mosquito killer is made of the principle that the mosquito has a strong tendency to light and heat, and the light source emitted by the ultraviolet fluorescent lamp is used to induce the mosquito to fly in...

12 3 4 5...>>>